>>>.Guardian.bete3>>>
unsigned
ARABIC.mEnPDA
برنامج مفيد ورائع جدا يقوم هذا البرنامج بحماية تطبيقاتك
والسم كارت من السرقه
وهوه ايضا نظام جديد لحماية هواتف السامبيان فبمجرد فتح انارة الهاتف او استعمال الهاتف فالبرنامج يبدأ بالتعرف على السيم كارت
وان لم يتم التعرف على البطاقه فسيقوم بارسال رساله نصيه الى رقم جوال تحدده مسبقا يجب اضافة شهاده للبرنامج قبل التثبيت 
Beta3:
Fixed bugs:
- The Secred Code Request now works propely also on N73
- Pressing “Cancel” in the Secret Code request, the error message will not be shown.
- Remote Command “//LOSTCODE” now propely works also if the recipient number hasn’t the international prefix.
- The sms “Sim Changed” wasn’t sent if the recipient number was entered in a non-standard format.
Improvements:
- Inactivity Timer has been introduced to avoid continuous Secret Code requests.
- It’s now possibile to test Delete / Localize / Config / FakeSms / Forward commands.
- The Secret Code request now completely the Protected Application, it’s no more possibile to see the Application Data in background (e.g. Names in Contacts)
- In the Authorized Sim List the IMSI code has been replaced with the operator name.
- In the text-input boxes the T9 input method is used as default.
- The delimiter “//” for remote control commando has been replaced with simpler “*”, so the command to recover the secret code it’s no more “//LOSTCODE” but currently it’s “*LOSTCODE”.
- In the Protected Applications list it’s possibile to filter the list using the appropriate input . Please note that the currently selected applications will be always shown.
- Other general improvements.
Remote Control Commands and Expected Behaviour:
- All the commando are available only in the “Test Sms Commands” menu’.
In this Beta version, IT’S NOT possible to use the remote control commando by sms, the only working command by sms is “*LOSTCODE” for recovering the secret code.
- The commands sends some reply sms to the recipient.
- In this version all the sms sent/received by Guardian will be visibile in the log-detail, in the final version will not be left any traces.
Delete
- WARNING! This command will delete a lot of personal, so it’s highly recommended to make a backup before using this command.
- Depending on the amount of data currently saved in the device, this command could take some seconds to complete and the application could seems to be locked / unresponsive, as soon as the deleting will be completed everything will came back to the normal and a confirmation sms will be sent to the recipient number.
Localize:
- For testing this command do not close Guardian. Closing Guardian, the command execution will be cancelled.
- Localize will try to obtain the current GPS location for 2 minutes using the integrated GPS received (if available) or the external bluetooth GPS (if available).
- In case of fail to obatain the current GPS location within 2minutes, then it will proceed to using the gsm cell-id information retrieved from network.
- Localize will send a total amout of 2 sms at regular interval of 1 minute, containing the GPS location of the cell-id.
Config:
- This command set Guardin in “Not Active” status and sends a confirmation sms to the recipient number.
FakeSms:
- This command will simulate on the phone a fake sms , using “Guardian” as sender and “Available on February” as text, then it will send a confirmation sms to the recipient number.
Forward:
- This command cause the sending to the recipient number of some sms containing: one phonebook contact, one incoming sms, and one received call.
Alarm:
- For technical reasons involved in the certification process I couldn’t include this command in the Beta version, anyway, It will be available on the final version.
In the Final Version:
- Inserting a wrong Secret Code, the access to the Protected Application will not be granted.
- All the sms sent/received by Guardian will not be shown in the log-details.
- In the Gold and Platinum editions the “Sim Changed” sms notification will contain also the cell-id informations.
- All the Remote Control Commando will be available using sms, and will be possibile to declare all the parameters for each command.
- Will be available the Alarm Command.
- In the Localize Command will be possibile to declare a GPS waiting time = 0, in such case, will be immediatly sent the cell-id, or, avoiding at all to declare a GPS waiting time, the Localize command will continue to retrieve a GPS signal forever and as soon as it will got a GPS signal will send the current latitude, longitude informations.
Compatible devices:
3250, 5500, 5700, 6110, 6120, 6121, 6290, E50, E60, E61, E62, E65, E70, E90, N71, N73, N75, N76, N80, N81, N82, N91, N92, N93, N95